INTELLIGENT ENERGY MANAGEMENT • 13-PIN
TCBM-Sender
Intelligent charging.
Confident travelling.
An automatic controller for the trailer-battery charging circuit. It monitors the vehicle’s electrical-system voltage and activates its output only above 13.3 V, helping to protect the vehicle battery’s starting capability.
AUTOMATIC ACTIVATION MAX. 15 A LOW STANDBY CURRENT ALL-SEASON OPERATION

How TCBM-Sender works — automatic trailer-battery charging control above 13.3 V.> 13.3 V ACTIVATION THRESHOLD
15 A MAX. OUTPUT CURRENT
≤ 1 mA QUIESCENT CURRENT
−40…+85°C OPERATING TEMPERATURE
⚡
AUTOMATIC CONTROL
How does TCBM-Sender work?
01 Voltage monitoring The module continuously checks the voltage available in the vehicle’s electrical system.
02 Smart activation Once the voltage exceeds 13.3 V, the charging output is activated automatically.
03 Protection priority Charging pauses when the voltage is low or the vehicle electrical system is under a heavy load.

OPTION 1 • STANDARD INSTALLATION
Direct control of the pin 10 circuit
For a typical trailer installation and an auxiliary battery with a capacity below 250 Ah. The controller’s red input must be powered directly from the vehicle battery through a 10 A fuse.
Vehicle battery+12 V
15 Afuse
TCBM-Sendervoltage control
13-pin socketoutput → pin 10
Red • 1.5 mm²power input
Red/black • 1.5 mm²charging output
Black • 0.35 mm²controller ground
250+
OPTION 2 • HIGH CAPACITY
Battery capacity of 250 Ah or more

For a motorhome or another installation with a large auxiliary battery, use a 30–40 A relay. TCBM-Sender controls the relay, while the main current flows through a suitably selected and protected circuit.
Main charging and ground conductors: minimum 2.5 mm² • circuit protection as specified in the instruction.Technical data
| Operating voltage | 13.5 V (±30%) |
| Output current | max. 10 A |
| Connected load | up to 120 W |
| Quiescent current | max. 1 mA |
| Operating temperature | −40…+85°C |
| Trailer system | 13-pin socket |
Pre-commissioning check
✓ direct, fused supply from the vehicle battery ✓ reliable chassis ground and correct pin 11 return circuit ✓ output connection to pin 10 verified ✓ cables protected against abrasion and moisture ✓ fuse ratings selected for the installation optionImportant — direct battery connection Connect the red TCBM-Sender input directly to the vehicle battery through a 10 A fuse. Do not use a cigarette-lighter socket or an arbitrary auxiliary circuit — overloading it may damage the vehicle wiring. Do not interchange the module input and output.
Download instructions
Full connection diagrams, the relay option and the installation checklist.
